日立公司制造的Φ1020*4320轧辊剥离掉块失效分析 | |
于维成; 杨振国; 鲍日清 | |
1999 | |
Source Publication | 铸造
![]() |
ISSN | 1001-4977 |
Volume | 000Issue:005Pages:39-41 |
Abstract | 日立公司离心复合铸造的高合金Φ1020*4320轧辊在鞍钢厚板厂使用中发生低寿命剥离掉块失效。本文通过超声探伤、SEM断口、金相及微区成分分析查明剥离掉块起源于轧辊最后凝固的热节区,由于冶金质量低劣致使该区夹渣缺陷集中,材料脆分,内外层间熔合不良,从而导致轧辊冷热疲劳抗力下降发生低寿命剥离掉块失效。 |
Keyword | 离心复合铸造 轧辊 剥离 失效分析 |
Indexed By | CSCD |
Language | 中文 |
CSCD ID | CSCD:934325 |
Citation statistics |
Cited Times:1[CSCD]
[CSCD Record]
|
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/154345 |
Collection | 中国科学院金属研究所 |
Affiliation | 中国科学院金属研究所 |
Recommended Citation GB/T 7714 | 于维成,杨振国,鲍日清. 日立公司制造的Φ1020*4320轧辊剥离掉块失效分析[J]. 铸造,1999,000(005):39-41. |
APA | 于维成,杨振国,&鲍日清.(1999).日立公司制造的Φ1020*4320轧辊剥离掉块失效分析.铸造,000(005),39-41. |
MLA | 于维成,et al."日立公司制造的Φ1020*4320轧辊剥离掉块失效分析".铸造 000.005(1999):39-41. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment