IMR OpenIR
110取向镍基单晶合金在蠕变过程中的组织演变
其他题名Microstructure Evolution in a Nickel-base Single Crystal Superalloy with 110 Orientation during Creep Process
水丽; 杨彦红; 于金江
2009
发表期刊机械工程材料
ISSN1000-3738
卷号000期号:006页码:6-9
摘要研究了一种110取向的镍基单晶高温合金在1040℃、150MPa和850℃、500MPa条件下的蠕变性能、蠕变过程中γ’相的形貌演变以及γ’相的筏化机理,并对拉断后试样的纵向截面进行了SEM形貌观察。结果表明:在1040℃、150MPa条件下,沿110取向施加应力拉伸时,合金中T/相形成了与应力轴成45°角的层片状筏化组织;距断口不同位置处γ’相的粗化程度存在明显差异;而在850℃、500MPa条件下,拉伸蠕变后合金中γ’相没有发生明显的粗化现象。
其他摘要The tensile creep tests were conducted on a Ni-base single crystal superalloy with 110 orientation under the conditions of 1 040 ℃/150 MPa and 850 ℃/500 MPa, respectively. The creep properties and the microstructure evolution during the creep process were investigated. The longitudinal section morphology of the tensile fracture was observed by SEM. The results show that the γ' phase of the Ni-base single crystal superalloy with 110 orientation formed the lamellar-type raft structure with inclined 45° with the stress axis under the condition of 1 040 ℃/150 MPa There was evident difference in the. degree of γ' phase coarsening at different distances away from the fractured surface. However, the γ' phase was not coarsened obviously under the condition of 850 ℃/500 MPa.
关键词镍基单晶高温合金 拉伸蠕变 γ’相 筏化组织
收录类别CSCD
语种中文
CSCD记录号CSCD:3538376
引用统计
被引频次:1[CSCD]   [CSCD记录]
文献类型期刊论文
条目标识符http://ir.imr.ac.cn/handle/321006/156233
专题中国科学院金属研究所
作者单位中国科学院金属研究所
推荐引用方式
GB/T 7714
水丽,杨彦红,于金江. 110取向镍基单晶合金在蠕变过程中的组织演变[J]. 机械工程材料,2009,000(006):6-9.
APA 水丽,杨彦红,&于金江.(2009).110取向镍基单晶合金在蠕变过程中的组织演变.机械工程材料,000(006),6-9.
MLA 水丽,et al."110取向镍基单晶合金在蠕变过程中的组织演变".机械工程材料 000.006(2009):6-9.
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[水丽]的文章
[杨彦红]的文章
[于金江]的文章
百度学术
百度学术中相似的文章
[水丽]的文章
[杨彦红]的文章
[于金江]的文章
必应学术
必应学术中相似的文章
[水丽]的文章
[杨彦红]的文章
[于金江]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。