IMR OpenIR
A New Aging Treatment Way for Near α High Temperature Titanium Alloys
Alternative TitleA New Aging Treatment Way for Near α High Temperature Titanium Alloys
Jun Zhang1; Na Peng1; Qingjiang Wang1; Xinan Wang1
2009
Source Publication材料科学技术学报:英文版
ISSN1005-0302
Volume000Issue:004Pages:454-458
AbstractTwo near α titanium alloys, Ti-5.6Al-4.8Sn-2.0Zr-1Mo-0.35Si (1#) and Ti-6.0AI-4.8Sn-2.0Zr-1Mo-0.35Si (2#), were solution-treated in the upper α+β phase fields, and the duplex mixture microstructures consisting of the less volume fraction primary α phase (αp) and the transformed β phase (βt) were obtained. The aging treatments were carried out at 700℃ for 1# alloy and 760℃ for 2# alloy under varied terms, respectively. It guaranteed α2 ordered phase to precipitate only in αp but not in βt for the two alloys. The slower precipitation and growth of the α2 ordered phase and silicide was observed in 1# alloy in comparison with 2# alloy. The mechanical properties including tensile strength and ductility, the creep and lasting properties at 600℃ were investigated. Prolonging aging time did not predominantly change the tensile strength and ductility for the two alloys. The 600℃/100 h thermal exposure caused a notable decrease of tensile ductility in 2# alloy though no distinct decrease could be observed in 1# alloy after the thermal exposure. The lasting property of i# alloy was increased with prolonging aging time and finally was equal to or even better than that of 2# alloy. Nevertheless, no evident increase emerged in 2# alloy with prolonging aging time. Similarly, the creep property of 1# alloy monotonously increased with increasing aging time and finally was equal to or even better than that of 2# alloy. No evident increase could be observed for 2# alloy. It can be deduced that the overgrowth of α2 ordered phase and silicide is unable to enhance hot strength properties but cause an unacceptable damage to tensile ductility. The optimum equilibrium of the comprehensive properties depending on the proper control of α2 ordered phase and silicide can be achieved by properly selecting aging temperature and time.
Other AbstractTwo near α titanium alloys, Ti-5.6Al-4.8Sn-2.0Zr-1Mo-0.35Si (1#) and Ti-6.0AI-4.8Sn-2.0Zr-1Mo-0.35Si (2#), were solution-treated in the upper α+β phase fields, and the duplex mixture microstructures consisting of the less volume fraction primary α phase (αp) and the transformed β phase (βt) were obtained. The aging treatments were carried out at 700℃ for 1# alloy and 760℃ for 2# alloy under varied terms, respectively. It guaranteed α2 ordered phase to precipitate only in αp but not in βt for the two alloys. The slower precipitation and growth of the α2 ordered phase and silicide was observed in 1# alloy in comparison with 2# alloy. The mechanical properties including tensile strength and ductility, the creep and lasting properties at 600℃ were investigated. Prolonging aging time did not predominantly change the tensile strength and ductility for the two alloys. The 600℃/100 h thermal exposure caused a notable decrease of tensile ductility in 2# alloy though no distinct decrease could be observed in 1# alloy after the thermal exposure. The lasting property of i# alloy was increased with prolonging aging time and finally was equal to or even better than that of 2# alloy. Nevertheless, no evident increase emerged in 2# alloy with prolonging aging time. Similarly, the creep property of 1# alloy monotonously increased with increasing aging time and finally was equal to or even better than that of 2# alloy. No evident increase could be observed for 2# alloy. It can be deduced that the overgrowth of α2 ordered phase and silicide is unable to enhance hot strength properties but cause an unacceptable damage to tensile ductility. The optimum equilibrium of the comprehensive properties depending on the proper control of α2 ordered phase and silicide can be achieved by properly selecting aging temperature and time.
Keyword高温钛合金 时效处理 机械性质 老化处理
Indexed ByCSCD
Language中文
CSCD IDCSCD:3652588
Citation statistics
Document Type期刊论文
Identifierhttp://ir.imr.ac.cn/handle/321006/156339
Collection中国科学院金属研究所
Affiliation1.沈阳大学
2.中国科学院金属研究所
Recommended Citation
GB/T 7714
Jun Zhang,Na Peng,Qingjiang Wang,et al. A New Aging Treatment Way for Near α High Temperature Titanium Alloys[J]. 材料科学技术学报:英文版,2009,000(004):454-458.
APA Jun Zhang,Na Peng,Qingjiang Wang,&Xinan Wang.(2009).A New Aging Treatment Way for Near α High Temperature Titanium Alloys.材料科学技术学报:英文版,000(004),454-458.
MLA Jun Zhang,et al."A New Aging Treatment Way for Near α High Temperature Titanium Alloys".材料科学技术学报:英文版 000.004(2009):454-458.
Files in This Item:
There are no files associated with this item.
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[Jun Zhang]'s Articles
[Na Peng]'s Articles
[Qingjiang Wang]'s Articles
Baidu academic
Similar articles in Baidu academic
[Jun Zhang]'s Articles
[Na Peng]'s Articles
[Qingjiang Wang]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[Jun Zhang]'s Articles
[Na Peng]'s Articles
[Qingjiang Wang]'s Articles
Terms of Use
No data!
Social Bookmark/Share
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.