电触点用Ag/Cr2O3复合膜的制备及性能研究 | |
Alternative Title | Preparation and Properties of Ag/Cr2O3 Composite Film for Application As Electric Contact |
张洪亮; 彭晓 | |
2012 | |
Source Publication | 腐蚀科学与防护技术
![]() |
ISSN | 1002-6495 |
Volume | 24.0Issue:005Pages:416-419 |
Abstract | 采用Ag与纳米Cr颗粒(平均粒径为30nm)共电沉积制备Ag/2.4mass%Cr复合镀层后经500℃空气中氧化两步法工艺,在cu基体上制备出电触点用Ag/4.0Cr20,复合膜.结果表明,Ag/2.4Cr复合镀层发生了Cr颗粒原位内氧化.与文献报道的采用合金内氧化法制备的常用Ag/MexO,型电触点材料(如Ag/12CdO)相比,所制备Ag/4.0Cr2O3复合膜的密度和电阻率相当,硬度更高. |
Other Abstract | A Ag/4.0 mass%Cr203 composite film was fabricated on Cu substrate for application as electric contact through a two-step process: prior fabrication of a Ag/2.4Cr composite coating through co-electrodeposition of Ag with Cr nanoparticles (mean size: 30 nm) and then oxidation at 500℃ in air. The results showed that the Cr particles in the Ag/2.4Cr composite coating were locally and diffusionlessly oxidized. Compared to the conventional Ag/MexOy type electric contacts (such as Ag/12CdO) fabricated by internal oxidation of the corresponding Ag-Me alloys (e.g., Ag-10.5Cd) reported, the Ag/4.0Cr2O3 composite film has similar density and electrical resistivity, but a higher hardness. |
Keyword | 电触点 复合电沉积 内氧化 |
Indexed By | CSCD |
Language | 中文 |
CSCD ID | CSCD:4643484 |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/157529 |
Collection | 中国科学院金属研究所 |
Affiliation | 中国科学院金属研究所 |
Recommended Citation GB/T 7714 | 张洪亮,彭晓. 电触点用Ag/Cr2O3复合膜的制备及性能研究[J]. 腐蚀科学与防护技术,2012,24.0(005):416-419. |
APA | 张洪亮,&彭晓.(2012).电触点用Ag/Cr2O3复合膜的制备及性能研究.腐蚀科学与防护技术,24.0(005),416-419. |
MLA | 张洪亮,et al."电触点用Ag/Cr2O3复合膜的制备及性能研究".腐蚀科学与防护技术 24.0.005(2012):416-419. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment