Low cycle fatigue and high cycle fatigue of K4750 Ni-based superalloy at 600 degrees C: Analysis of fracture behavior and deformation mechanism | |
Hou, Kunlei1,2; Ou, Meiqiong1; Wang, Min1; Hao, Xianchao1; Ma, Yingche1; Liu, Kui1 | |
Corresponding Author | Ma, Yingche(ycma@imr.ac.cn) ; Liu, Kui(kliu@imr.ac.cn) |
2021-07-13 | |
Source Publication | MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
![]() |
ISSN | 0921-5093 |
Volume | 820Pages:13 |
Abstract | The fracture behavior and deformation mechanism of a new casting Ni-based superalloy K4750 during straincontrolled low cycle fatigue (LCF) and stress-controlled high cycle fatigue (HCF) at 600 degrees C were investigated. The crack in LCF originated from surface and propagated perpendicular to the loading direction in a striationsassisted Stage II manner. Whereas, the crack in HCF mostly initiated at large-size inclusions and its propagation followed a crystallographic Stage I mode. The microstructures controlling the alloy failure in the two tests were also different. The crack propagation in LCF was accelerated by MC carbides which induced second cracks in front of the primary crack tip. By contrast, the formation of crack in HCF was more affected by the inclusion, grain size and grain orientation. Their presence in unfavorable forms led to premature failure of the alloy and a substantial scatter in the stress-life data. In addition, STEM observation showed that the deformation in LCF occurred on multiple parallel {111} planes with high density of entangled dislocations. The produced slip bands were in close proximity with average spacing below 0.1 mu m. However, the distribution of slip bands in HCF was more isolated with separation up to a few microns. The dislocations in slip bands often traversed the gamma/gamma ' structure in pairs as constrained by the anti-phase boundary in gamma ' phase. The heterogeneous deformation in highly isolated slip bands was deemed to account for the Stage I cracking in HCF, which was discussed in this study. |
Keyword | Ni-based superalloy Low cycle fatigue High cycle fatigue Fracture analysis Stage I II cracking Deformation structure |
Funding Organization | National Natural Science Foundation of China ; Natural Science Foundation of Liaoning Province of China ; China Postdoctoral Science Foundation |
DOI | 10.1016/j.msea.2021.141588 |
Indexed By | SCI |
Language | 英语 |
Funding Project | National Natural Science Foundation of China[52001314] ; Natural Science Foundation of Liaoning Province of China[2020BS008] ; China Postdoctoral Science Foundation[2020M671403] |
WOS Research Area | Science & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering |
WOS Subject | Nanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
WOS ID | WOS:000668746500002 |
Publisher | ELSEVIER SCIENCE SA |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/159909 |
Collection | 中国科学院金属研究所 |
Corresponding Author | Ma, Yingche; Liu, Kui |
Affiliation | 1.Chinese Acad Sci, Shi Changxu Innovat Ctr Adv Mat, Inst Met Res, Shenyang 110016, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Hefei 230026, Peoples R China |
Recommended Citation GB/T 7714 | Hou, Kunlei,Ou, Meiqiong,Wang, Min,et al. Low cycle fatigue and high cycle fatigue of K4750 Ni-based superalloy at 600 degrees C: Analysis of fracture behavior and deformation mechanism[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2021,820:13. |
APA | Hou, Kunlei,Ou, Meiqiong,Wang, Min,Hao, Xianchao,Ma, Yingche,&Liu, Kui.(2021).Low cycle fatigue and high cycle fatigue of K4750 Ni-based superalloy at 600 degrees C: Analysis of fracture behavior and deformation mechanism.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,820,13. |
MLA | Hou, Kunlei,et al."Low cycle fatigue and high cycle fatigue of K4750 Ni-based superalloy at 600 degrees C: Analysis of fracture behavior and deformation mechanism".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 820(2021):13. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment