Precipitation Behavior and Mechanical Properties of a 16Cr-25Ni Superaustenitic Stainless Steel Weld Metal During Post-weld Heat Treatment

doi:10.1007/s40195-021-01274-6

IMR OpenIR

	Precipitation Behavior and Mechanical Properties of a 16Cr-25Ni Superaustenitic Stainless Steel Weld Metal During Post-weld Heat Treatment
	Tian, Wenbin 1,2; Wu, Dong 1; Li, Yiyi 1,3; Lu, Shanping 1
通讯作者	Lu, Shanping(shplu@imr.ac.cn)
	2021-07-08
发表期刊	ACTA METALLURGICA SINICA-ENGLISH LETTERS
ISSN	1006-7191
页码	14
摘要	A 16Cr-25Ni superaustenitic stainless steel weld metal for austenitic stainless steel/ferrite heat-resistance steel dissimilar metal weld was designed and prepared through tungsten inert-gas welding. The precipitate evolution and its correlation with mechanical properties were investigated during post-weld heat treatment (PWHT) at 690 degrees C for up to 12 h. The primary precipitates in the as-welded weld metal were identified as Mo-rich M6C carbides in the interdendritic region and semicontinuous fine-sized M23C6 carbides along grain boundary. After PWHT, three types of precipitates coexisted in the interdendritic region: primary M6C carbides, newly precipitated Mo-rich M2X carbonitrides and some of the secondary M23C6 carbides. Additionally, mass secondary M23C6 carbides formed and coarsened along grain boundary. No undesirable intermetallic phases formed during the whole period. The M2X and interdendritic M23C6 improved the strength of the weld metal after PWHT, but the elongation and impact toughness degraded, which were mainly owing to the intergranular M23C6 carbides that changed the fracture mode from ductile transgranular mode to mixed mode of transgranular and intergranular fracture. Meanwhile, the coarsening of M2X carbonitrides may lead to the elongation loss during 8 h to 12 h. Evolution of impact toughness was also related to the M2X carbonitrides, which made the crack easier to propagate compared with austenitic matrix and contributed to the decline of impact toughness. However, due to the sluggish precipitation of M2X carbonitrides with longer holding time, the decreasing trend became slow from 4 to 12 h. The results showed that PWHT should be controlled within 8 h to obtain better combination of strength and ductility.
关键词	Superaustenitic stainless steel Weld metal Post-weld heat treatment Precipitate evolution Mechanical properties
资助者	innovation project of Shenyang National Laboratory for Materials Science
DOI	10.1007/s40195-021-01274-6
收录类别	SCI
语种	英语
资助项目	innovation project of Shenyang National Laboratory for Materials Science[SYNL-2019]
WOS研究方向	Metallurgy & Metallurgical Engineering
WOS类目	Metallurgy & Metallurgical Engineering
WOS记录号	WOS:000670867100001
出版者	CHINESE ACAD SCIENCES, INST METAL RESEARCH
引用统计	被引频次：10[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/160157
专题	中国科学院金属研究所
通讯作者	Lu, Shanping
作者单位	1.Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, Shenyang 110016, Peoples R China 2.Univ Sci & Technol China, Sch Mat Sci & Engn, Shenyang 110016, Peoples R China 3.Chinese Acad Sci, Inst Met Res, CAS Key Lab Nucl Mat & Safety Assessment, Shenyang 110016, Peoples R China
推荐引用方式 GB/T 7714	Tian, Wenbin,Wu, Dong,Li, Yiyi,et al. Precipitation Behavior and Mechanical Properties of a 16Cr-25Ni Superaustenitic Stainless Steel Weld Metal During Post-weld Heat Treatment[J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS,2021:14.
APA	Tian, Wenbin,Wu, Dong,Li, Yiyi,&Lu, Shanping.(2021).Precipitation Behavior and Mechanical Properties of a 16Cr-25Ni Superaustenitic Stainless Steel Weld Metal During Post-weld Heat Treatment.ACTA METALLURGICA SINICA-ENGLISH LETTERS,14.
MLA	Tian, Wenbin,et al."Precipitation Behavior and Mechanical Properties of a 16Cr-25Ni Superaustenitic Stainless Steel Weld Metal During Post-weld Heat Treatment".ACTA METALLURGICA SINICA-ENGLISH LETTERS (2021):14.