IMR OpenIR
Ni-Cu-Re合金在升温过程中的摩擦磨损行为及机理的研究
尹付成
学位类型硕士
导师李诗(左钅右卓)
1989
学位授予单位中国科学院金属研究所
学位授予地点中国科学院金属研究所
摘要用旋转式针盘高温摩擦磨损实验机测定了Ni-Cu-Re及纯Ni和Ni-Cu,Ni-Re二元合金摩擦系数随温度的变化规律,以及温度和载荷对Ni85%-Cu7.5%-Re7.5%合金磨损行为的影响。发现合金的摩擦系数和磨损系数在400 ℃左右有明显的降低。Re元素的加入促进了这种转变。在高温时Re和Cu共同作用使摩擦系数降低。用金相,X-射线衍射、SEM,STEM等手段对合金组织结构、磨痕形貌以及磨屑和合金氧化后亚表层成份进行了详细分析。认为低的摩擦磨损是由于合金在高温摩擦过程中形成了一层易挥发的Re的氧化物及Re、Cu复合氧化物。这层氧化物具有低的剪切强度和低的熔点,具有很好的润滑性能。而且这层氧化物对于釉质层的形成起了促进作用,因而改善了合金的高温自润滑性能。本工作结果表明在Ni基合金中加入一定的Re、Cu元素可以改善合金的高温摩擦磨损行为。
其他摘要The dependence of friction coefficient vs. temperature and the effect of environment on the wear behavior of Ni- Cu- Re alloys have been measured. It was found that the friction and wear coefficient were reduced drastically at the elevated temperature. The results showed that Re played an important role in decreasing the friction and wear coefficient of alloys. The microstructure and composition about the oxide films and subsurface and the worn surface of alloys were investigated by means of metallography, X-ray diffraction, SEM and STEM methods. The low friction and wear coefficient related to the formation of volatile rhenium oxides during friction at high temperature. The rhenium oxides with low shear strength and melting point, form a soft glaze layer with CuO and NiO as the lubricant in the interface of tribosystem. The low melting point rhenium oxides improved the development of glaze layer. So alloys exhibited an excellent self-lubricing ability at high temperature. The results showed that the addition of Re and Cu in the Ni base alloys would imporved the friction and wear behavior at high temperature.
页数42
语种中文
文献类型学位论文
条目标识符http://ir.imr.ac.cn/handle/321006/17412
专题中国科学院金属研究所
推荐引用方式
GB/T 7714
尹付成. Ni-Cu-Re合金在升温过程中的摩擦磨损行为及机理的研究[D]. 中国科学院金属研究所. 中国科学院金属研究所,1989.
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[尹付成]的文章
百度学术
百度学术中相似的文章
[尹付成]的文章
必应学术
必应学术中相似的文章
[尹付成]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。