| Effect of Minor Sc Addition on Microstructure and Tensile Properties of Hot-Extruded 7055 Alloy | |
| Zhang, Guowei1; Feng, Xiaohui2; Yang, Yuansheng2 | |
| Corresponding Author | Zhang, Guowei(20030358@nuc.edu.cn) ; Feng, Xiaohui(xhfeng@imr.ac.cn) |
| 2022-06-06 | |
| Source Publication | JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
 |
| ISSN | 1059-9495 |
| Pages | 8 |
| Abstract | The microstructure and tensile properties of hot-extruded Al-8Zn-2Mg-2Cu-0.15Zr alloy (7055 alloy) with the minor addition of Sc were investigated. The 0.1 and 0.2 wt.% Sc were added into 7055 alloy during the preparation process by conventional casting. Attributing to the Sc additions, the grain sizes of as-cast ingots were remarkably refined and the irregular grain morphology changed to nearly spherical. Correspondingly, the distinctly refined microstructure of the 7055 alloy with Sc addition was achieved after hot extrusion. Unlike most reported extrusion cases of 7055 alloy, the extrusion temperature and ram speed were set to be 500 degrees C and 0.1 mm/s, respectively. As the added Sc increased from 0 to 0.1 and 0.2 wt.%, the yield strength (YS) of the T6 treated samples of extruded 7055 alloys were improved from 652 to 660 and 695 MPa, and the ultimate tensile strength (UTS) was 701, 706, and 744 MPa, respectively. The elongation of all the T6 samples remained to be about 11.5%. The good tensile properties of these experimental alloys are mainly attributed to grain refinement, extrusion texture, and the abundant precipitated particles, including Al-3(ScZr) and eta(MgZn2), which effectively pin the dislocation and hinder the migration of grain boundaries. |
| Keyword | Al alloy hot extrusion microstructure scandium addition tensile properties |
| Funding Organization | National Key Research and Development Program of China ; National Science and Technology Major Project ; Key Research and Development Plan of Shandong Province |
| DOI | 10.1007/s11665-021-06383-y |
| Indexed By | SCI |
| Language | 英语 |
| Funding Project | National Key Research and Development Program of China[2018YFE115800] ; National Science and Technology Major Project[2017-VI-0003-0073] ; Key Research and Development Plan of Shandong Province[2019JZZY020329] |
| WOS Research Area | Materials Science |
| WOS Subject | Materials Science, Multidisciplinary |
| WOS ID | WOS:000806671200002 |
| Publisher | SPRINGER |
| Citation statistics | |
| Document Type | 期刊论文 |
| Identifier | http://ir.imr.ac.cn/handle/321006/174192 |
| Collection | 中国科学院金属研究所 |
| Corresponding Author | Zhang, Guowei; Feng, Xiaohui |
| Affiliation | 1.North Univ China, Sch Mat Sci & Engn, Taiyuan 030051, Peoples R China 2.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China |
| Recommended Citation GB/T 7714 | Zhang, Guowei,Feng, Xiaohui,Yang, Yuansheng. Effect of Minor Sc Addition on Microstructure and Tensile Properties of Hot-Extruded 7055 Alloy[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2022:8. |
| APA | Zhang, Guowei,Feng, Xiaohui,&Yang, Yuansheng.(2022).Effect of Minor Sc Addition on Microstructure and Tensile Properties of Hot-Extruded 7055 Alloy.JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,8. |
| MLA | Zhang, Guowei,et al."Effect of Minor Sc Addition on Microstructure and Tensile Properties of Hot-Extruded 7055 Alloy".JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022):8. |
| Files in This Item: | There are no files associated with this item. | |||||
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment