IMR OpenIR
Effects of homogenization temperature on creep performance of laser powder bed fusion-fabricated Inconel 718 at 650?
Ma, Tao1; Zhang, Guang-Ping2; Tan, Ping3; Zhang, Bin1
Corresponding AuthorZhang, Bin(zhangb@atm.neu.edu.cn)
2022-09-15
Source PublicationMATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
ISSN0921-5093
Volume853Pages:12
AbstractThe effect of homogenization temperature (1000 ?, 1100 ? and 1200 ?) on creep performance of laser powder bed fusion-fabricated Inconel 718 at 650 ? was investigated utilizing the small punch creep test method and the small punch creep specimens loaded perpendicular to the building direction, which can well reflect the comprehensive performance of the specimen in all radial directions of the circular plane parallel to the building direction. The results show that the specimen homogenized at 1100? for 1 h followed by double-aging treatment exhibited better creep performance than the other two ones homogenized at 1000 ? and 1200?. Such enhancement of the creep performance is attributed to fewer crack initiation sites, the higher GB sliding rate near the precipitates at grain boundaries to release stress concentrations, the higher strengthening effect of gamma & PRIME;& PRIME; phases in grains, and the more effective resistance to cracking by the special GBs than the other specimens. The basic mechanism for the small punch creep of laser powder bed fusion-fabricated Inconel 718 at 650 ? was elucidated by the careful characterization of the microstructures and theoretical calculations. A feasible ho-mogenization strategy for further improving the SPC performance of laser powder bed fusion-fabricated Inconel 718 alloy is to make the specimen have fewer and smaller granular precipitates at GBs, and more tortuous GBs by introducing more special GBs with considering the grain size. Such a key point can be used to determine the appropriate subsequent heat treatment for laser powder bed fusion thin-walled Inconel 718 component.
KeywordSelective laser melting Inconel 718 Homogenization Small punch creep Crack initiation Cracking resistance
Funding OrganizationNational Natural Science Foundation of China (NSFC) ; Fundamental Research Project of Shenyang National Laboratory for Materials Science
DOI10.1016/j.msea.2022.143794
Indexed BySCI
Language英语
Funding ProjectNational Natural Science Foundation of China (NSFC)[52171128] ; National Natural Science Foundation of China (NSFC)[51771207] ; Fundamental Research Project of Shenyang National Laboratory for Materials Science[L2019R18]
WOS Research AreaScience & Technology - Other Topics ; Materials Science ; Metallurgy & Metallurgical Engineering
WOS SubjectNanoscience & Nanotechnology ; Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering
WOS IDWOS:000843470300001
PublisherELSEVIER SCIENCE SA
Citation statistics
Document Type期刊论文
Identifierhttp://ir.imr.ac.cn/handle/321006/174513
Collection中国科学院金属研究所
Corresponding AuthorZhang, Bin
Affiliation1.Northeastern Univ, Sch Mat Sci & Engn, Key Lab Anisotropy & Texture Mat, Minist Educ, 3-11 Wenhua Rd, Shenyang 110819, Peoples R China
2.Chinese Acad Sci, Inst Met Res, Shenyang Natl Lab Mat Sci, 72 Wenhua Rd, Shenyang 110016, Peoples R China
3.Northwest Inst Nonferrous Met Res, 96 Wei Yang Rd, Xian 710016, Peoples R China
Recommended Citation
GB/T 7714
Ma, Tao,Zhang, Guang-Ping,Tan, Ping,et al. Effects of homogenization temperature on creep performance of laser powder bed fusion-fabricated Inconel 718 at 650?[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2022,853:12.
APA Ma, Tao,Zhang, Guang-Ping,Tan, Ping,&Zhang, Bin.(2022).Effects of homogenization temperature on creep performance of laser powder bed fusion-fabricated Inconel 718 at 650?.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,853,12.
MLA Ma, Tao,et al."Effects of homogenization temperature on creep performance of laser powder bed fusion-fabricated Inconel 718 at 650?".MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 853(2022):12.
Files in This Item:
There are no files associated with this item.
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[Ma, Tao]'s Articles
[Zhang, Guang-Ping]'s Articles
[Tan, Ping]'s Articles
Baidu academic
Similar articles in Baidu academic
[Ma, Tao]'s Articles
[Zhang, Guang-Ping]'s Articles
[Tan, Ping]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[Ma, Tao]'s Articles
[Zhang, Guang-Ping]'s Articles
[Tan, Ping]'s Articles
Terms of Use
No data!
Social Bookmark/Share
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.