| A symmetrical solid oxide fuel cell prepared by dry-pressing and impregnating methods |
| X. B. Zhu; Z. Lu; B. Wei; X. Q. Huang; Y. H. Zhang; W. H. Su
|
| 2011
|
发表期刊 | Journal of Power Sources
 |
ISSN | 0378-7753
|
卷号 | 196期号:2页码:729-733 |
摘要 | In this study, a simple and cost-effective dry-pressing method has been used to fabricate a symmetrical solid oxide fuel cell (SOFC) where the dense yttria-stabilized zirconia (YSZ) electrolyte film is sandwiched between two symmetrical porous YSZ layers in which La(0.75)Sr(0.25)Cr(0.5)Mn(0.5)O(3-delta) (LSCM) based anode and cathode are incorporated using wet impregnation techniques. The maximum power densities (P(max)) of a single cell with 32 wt.% LSCM impregnated YSZ anode and cathode reach 333 and 265 mW cm(-2) at 900 degrees C in dry H(2) and CH(4), respectively. The cell performance is further improved with additional impregnation of a small amount of Sm-doped CeO(2) (SDC) or Ni. When 6 wt.% Ni as catalyst is added to both the anode and cathode. P(max) values of 559 and 547 mW cm(-2) can be achieved, which are better than with SDC. The effect of Ni on the cathode performance is also investigated by impedance spectra analysis. (C) 2010 Elsevier B.V. All rights reserved. |
部门归属 | [zhu, xingbao; lue, zhe; wei, bo; huang, xiqiang; zhang, yaohui; su, wenhui] harbin inst technol, dept phys, ctr condensed matter sci & technol, harbin 150080, peoples r china. [su, wenhui] acad sinica, int ctr mat phys, shenyang 110015, peoples r china.;zhu, xb (reprint author), harbin inst technol, dept phys, ctr condensed matter sci & technol, harbin 150080, peoples r china;zhuxingbao008@163.com
|
关键词 | Symmetrical Solid Oxide Fuel Cells
Perovskite Oxide
Dry-pressing
Wet
Impregnation
Nickel/ceria Catalyst
Anode
Electrodes
La0.75sr0.25cr0.5mn0.5o3-delta
Composites
Cathode
|
URL | 查看原文
|
WOS记录号 | WOS:000282929500018
|
引用统计 |
|
文献类型 | 期刊论文
|
条目标识符 | http://ir.imr.ac.cn/handle/321006/30998
|
专题 | 中国科学院金属研究所
|
推荐引用方式 GB/T 7714 |
X. B. Zhu,Z. Lu,B. Wei,et al. A symmetrical solid oxide fuel cell prepared by dry-pressing and impregnating methods[J]. Journal of Power Sources,2011,196(2):729-733.
|
APA |
X. B. Zhu,Z. Lu,B. Wei,X. Q. Huang,Y. H. Zhang,&W. H. Su.(2011).A symmetrical solid oxide fuel cell prepared by dry-pressing and impregnating methods.Journal of Power Sources,196(2),729-733.
|
MLA |
X. B. Zhu,et al."A symmetrical solid oxide fuel cell prepared by dry-pressing and impregnating methods".Journal of Power Sources 196.2(2011):729-733.
|
修改评论