IMR OpenIR
Microstructural Features and Mechanical Properties Induced by the Spray Forming and Cold Rolling of the Cu-13.5 wt pct Sn Alloy
X. F. Wang; J. Z. Zhao; J. He; J. T. Wang
2008
发表期刊Journal of Materials Science & Technology
ISSN1005-0302
卷号24期号:5页码:803-808
摘要Copper alloys with high strength and high conductivity are an important functional material with full of potential applications. In the present investigation, a bronze with higher tin content (Cu-13.5 wt pct Sn) was prepared successfully by spray forming, the feasibility of cold rolling this alloy was investigated, and the cold rolling characteristics of this alloy have also been discussed. The results indicate that the spray-formed Cu-13.5 wt pct Sn alloy, compared with the as-cast ingot, shows a quite fine and homogeneous single-phase structure, and, therefore shows an excellent workability. It can be cold-rolled with nearly 15% reduction in the thickness per pass and the total reduction can reach 80%. The classical border between the wrought and cast alloys is shifted to considerably higher tin contents by spray forming. After proper thermo-mechanical treatment, spray-formed Cu-13.5 wt pct Sn alloy exhibits excellent comprehensive mechanical properties. Particularly, it shows a low elastic modulus (similar to 88 GPa) and a high flow stress (over 800 MPa) after cold forming. This combination of properties is unique in the domain of metallic materials and could open new possibilities in spring technology field.
部门归属[wang, xiaofeng; zhao, jiuzhou; he, jie; wang, jiangtao] chinese acad sci, inst met res, shenyang 110016, peoples r china.;zhao, jz (reprint author), chinese acad sci, inst met res, shenyang 110016, peoples r china;jzzhao@imr.ac.cn
关键词Spray Forming Cu-sn Alloys Cold Rolling Microstructure Mechanical Properties Solidification Process Droplets Deformation Simulation Behavior Copper
URL查看原文
WOS记录号WOS:000260048500026
引用统计
被引频次:4[WOS]   [WOS记录]     [WOS相关记录]
文献类型期刊论文
条目标识符http://ir.imr.ac.cn/handle/321006/33154
专题中国科学院金属研究所
推荐引用方式
GB/T 7714
X. F. Wang,J. Z. Zhao,J. He,et al. Microstructural Features and Mechanical Properties Induced by the Spray Forming and Cold Rolling of the Cu-13.5 wt pct Sn Alloy[J]. Journal of Materials Science & Technology,2008,24(5):803-808.
APA X. F. Wang,J. Z. Zhao,J. He,&J. T. Wang.(2008).Microstructural Features and Mechanical Properties Induced by the Spray Forming and Cold Rolling of the Cu-13.5 wt pct Sn Alloy.Journal of Materials Science & Technology,24(5),803-808.
MLA X. F. Wang,et al."Microstructural Features and Mechanical Properties Induced by the Spray Forming and Cold Rolling of the Cu-13.5 wt pct Sn Alloy".Journal of Materials Science & Technology 24.5(2008):803-808.
条目包含的文件
文件名称/大小 文献类型 版本类型 开放类型 使用许可
508.pdf(7107KB) 开放获取--
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[X. F. Wang]的文章
[J. Z. Zhao]的文章
[J. He]的文章
百度学术
百度学术中相似的文章
[X. F. Wang]的文章
[J. Z. Zhao]的文章
[J. He]的文章
必应学术
必应学术中相似的文章
[X. F. Wang]的文章
[J. Z. Zhao]的文章
[J. He]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。