Knowledge Management System Of Institute of metal research,CAS
热等静压制备Al2O3增强Ti2AlN金属陶瓷 | |
郑卓; 崔玉友; 杨锐 | |
2010-10-18 | |
Conference Name | 第十四届全国钛及钛合金学术交流会 |
Source Publication | 第十四届全国钛及钛合金学术交流会论文集 |
Conference Date | 2010-10-18 |
Conference Place | 上海 |
Abstract | 本文采用热等静压工艺,在1 000℃、100 MPa条件下,选择混合粉末Al3Ti+TiN+TiO2和Al3Ti+TiN,调整各粉末中不同成分的比例,找到性能合适的合金配比,利用XRD和扫描电镜研究压制后的样品的相组成和组织形貌。结果表明:粉末经热等静压后均可生成Ti2AlN相,但是生成物相比例不同;其中Al3Ti、TiN和TiO2的质量比为2.07:1.68:1的粉末压制出来的样品是完整的Ti22AIN基体,同时生成的Al2O3均匀弥散分布在基体中,对基体具有强化作用。 |
description.department | 中国科学院 金属研究所,沈阳 110016 |
Keyword | 粉末冶金 Ti2aln 金属陶瓷 热等静压 |
Funding Organization | 中国有色金属学会;中国金属学会;中国材料研究学会;中国有色金属工业协会 |
Language | 中文 |
Document Type | 会议论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/70939 |
Collection | 中国科学院金属研究所 |
Recommended Citation GB/T 7714 | 郑卓,崔玉友,杨锐. 热等静压制备Al2O3增强Ti2AlN金属陶瓷[C],2010. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment