IMR OpenIR
Investigation and improvement on structural stability and stress rupture properties of a Ni-Fe based alloy
Wang, Changshuai; Guo, YongAn; Guo, Jianting; Zhou, Lanzhang; cswang@imr.ac.cn; lzz@imr.ac.cn
2015
Source PublicationMATERIALS & DESIGN
ISSN0261-3069
Volume88Pages:790-798
AbstractThe structural stability and stress rupture properties of a Ni-Fe based alloy, considered as boiler materials in 700 degrees C advanced ultra-supercritical (A-USC) coal-fired power plants, was studied. Investigation on the structural stability of the existing alloy GH984 shows that the most important changes in the alloys are gamma' coarsening, the gamma' to eta transformation and the coarsening and agglomeration of grain boundary M23C6 during thermal exposure. The stress rupture strength was found to be slightly lower than the requirement of 700 degrees C A-USC. The fracture mode of creep tested specimens was intergranular fracture. Detailed analysis revealed that eta phase precipitation is sensitive to Ti/Al ratio and can be suppressed by decreasing Ti/Al ratio. The coarsening behavior of gamma' phase is related to Fe content. Adding B and P was suggested to stabilize M23C6 and increase grain boundary strength. Based on the research presented and analysis of the data, a modified alloy was developed through changes in composition. For the modified alloy, eta phase is not observed and M23C6 is still blocky and discretely distributes along grain boundary after thermal exposure at 700 degrees C for 20,000 h. Moreover, the creep strength is comparable to the levels of Ni-based candidate alloys for 700 degrees C A-USC. (C) 2015 Elsevier Ltd. All rights reserved.
description.department[wang, changshuai ; guo, yongan ; guo, jianting ; zhou, lanzhang] chinese acad sci, inst met res, shenyang 110016, peoples r china
KeywordNi-fe Based Alloy Creep Strength Structural Stability 700 Degrees c A-usc
Funding OrganizationNational High Technology Research and Development Program of China (863 Program) [2012AA03A501]; National Natural Science Foundation of China [51301171]; National Energy Administration Program of China [NY20110102-1]; Chinese Academy of Sciences; Sichuan Province Cooperation Program
Indexed Bysci
Language英语
WOS IDWOS:000364257300093
Citation statistics
Cited Times:41[WOS]   [WOS Record]     [Related Records in WOS]
Document Type期刊论文
Identifierhttp://ir.imr.ac.cn/handle/321006/74928
Collection中国科学院金属研究所
Corresponding Authorcswang@imr.ac.cn; lzz@imr.ac.cn
Recommended Citation
GB/T 7714
Wang, Changshuai,Guo, YongAn,Guo, Jianting,et al. Investigation and improvement on structural stability and stress rupture properties of a Ni-Fe based alloy[J]. MATERIALS & DESIGN,2015,88:790-798.
APA Wang, Changshuai,Guo, YongAn,Guo, Jianting,Zhou, Lanzhang,cswang@imr.ac.cn,&lzz@imr.ac.cn.(2015).Investigation and improvement on structural stability and stress rupture properties of a Ni-Fe based alloy.MATERIALS & DESIGN,88,790-798.
MLA Wang, Changshuai,et al."Investigation and improvement on structural stability and stress rupture properties of a Ni-Fe based alloy".MATERIALS & DESIGN 88(2015):790-798.
Files in This Item:
There are no files associated with this item.
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[Wang, Changshuai]'s Articles
[Guo, YongAn]'s Articles
[Guo, Jianting]'s Articles
Baidu academic
Similar articles in Baidu academic
[Wang, Changshuai]'s Articles
[Guo, YongAn]'s Articles
[Guo, Jianting]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[Wang, Changshuai]'s Articles
[Guo, YongAn]'s Articles
[Guo, Jianting]'s Articles
Terms of Use
No data!
Social Bookmark/Share
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.