Study of the processing map and hot deformation behavior of a Cu-bearing 317LN austenitic stainless steel

IMR OpenIR

	Study of the processing map and hot deformation behavior of a Cu-bearing 317LN austenitic stainless steel
	Xi, Tong; Yang, Chunguang; Shahzad, M. Babar; Yang, Ke; kyang@imr.ac.cn
	2015
发表期刊	MATERIALS & DESIGN
ISSN	0261-3069
卷号	87 页码:303-312
摘要	The hot-working behavior of a Cu-bearing 317LN austenitic stainless steel (317LN-Cu) was investigated in the 950-1150 degrees C temperature and 0.01-10 s(-1) strain rate range, respectively. The effects of different deformation parameters and optimum hot-working window were respectively characterized through analyzing flow stress curves, constitutive equations, processing maps and microstructures. The critical strain for dynamic recrystallization (DRX) was determined by the inflection point on theta-sigma and -partial derivative theta/partial derivative sigma-sigma curves. The peak stress was found to increase with decrease in temperature and increase in strain rate. Typical signs of DRX over a wide range of temperatures and strain rates were observed on the flow stress curves. The power dissipation maps in the strain range of 0.1-0.4 were basically similar, indicating the insignificant effect of strain on the power dissipation maps of 317LN-Cu. However, the instability maps showed strong strain sensitivity with increasing strain, which was attributed to the flow localization. The optimum hot-working window for 317L14-Cu was obtained in the temperature range 1100-1120 degrees C and strain rate range 0.01-0.018 s(-1), with a peak efficiency of 38%. Microstructural analysis revealed fine and homogenized recrystallized grains in this domain. (C) 2015 Elsevier Ltd. All rights reserved.
部门归属	[xi, tong] dalian univ technol, sch mat sci & engn, dalian 116024, peoples r china ; [xi, tong ; yang, chunguang ; shahzad, m. babar ; yang, ke] chinese acad sci, inst met res, shenyang 110016, peoples r china
关键词	Cu-bearing Stainless Steel Hot Compression Processing Maps Constitutive Equation Dynamic Recystallization
资助者	National Basic Research Program of China [2012CB619101]; National Natural Science Foundation of China [51371168]; Shenyang National Lab for Materials Science; Foundation of Jiangsu Collaborative Innovation Center of Biomedical Functional Materials
收录类别	sci
语种	英语
WOS记录号	WOS:000363816000035
引用统计	被引频次：62[WOS] [WOS记录] [WOS相关记录]
文献类型	期刊论文
条目标识符	http://ir.imr.ac.cn/handle/321006/75142
专题	中国科学院金属研究所
通讯作者	kyang@imr.ac.cn
推荐引用方式 GB/T 7714	Xi, Tong,Yang, Chunguang,Shahzad, M. Babar,et al. Study of the processing map and hot deformation behavior of a Cu-bearing 317LN austenitic stainless steel[J]. MATERIALS & DESIGN,2015,87:303-312.
APA	Xi, Tong,Yang, Chunguang,Shahzad, M. Babar,Yang, Ke,&kyang@imr.ac.cn.(2015).Study of the processing map and hot deformation behavior of a Cu-bearing 317LN austenitic stainless steel.MATERIALS & DESIGN,87,303-312.
MLA	Xi, Tong,et al."Study of the processing map and hot deformation behavior of a Cu-bearing 317LN austenitic stainless steel".MATERIALS & DESIGN 87(2015):303-312.