Knowledge Management System Of Institute of metal research,CAS
Study on anisotropy in microstructure and tensile properties of the 12Cr oxide dispersion strengthened (ODS) steel | |
Shen, Jingjie; Nagasak, Takuya; Muroga, Takeo; Li, Yanfen; Yang, Huilong; Kano, Sho; Abe, Hiroaki | |
2019-09-01 | |
Source Publication | FUSION ENGINEERING AND DESIGN
![]() |
ISSN | 0920-3796 |
Volume | 146Pages:1082-1085 |
Abstract | Microstructure and tensile properties ranged from ambient temperature to 700 degrees C of the 12Cr ODS steel were investigated by scanning electron microscopy, electron backscatter diffraction technique, and tensile tests. Results show that microstructure is composed of elongated grains with < 110 > axis parallel to rolling direction. Ultimate tensile strength and 0.2% offset yield strength gradually decrease with increasing test temperature. Uniform elongation and total elongation reduce with the temperature rising up to 500 degrees C, whereas increase at higher temperatures due to activation of slip systems. Moreover, ductility in rolling direction is better than that in transverse direction. Fracture surfaces suggest that a large number of small and uniform dimples, and predominant cleavage-like facets present in rolling direction, and transverse direction, respectively. |
Keyword | Oxide dispersion strengthened steels Microstructure Tensile properties Anisotropy |
Indexed By | SCI |
Language | 英语 |
WOS ID | WOS:000488307400243 |
Publisher | ELSEVIER SCIENCE SA |
Citation statistics | |
Document Type | 期刊论文 |
Identifier | http://ir.imr.ac.cn/handle/321006/80778 |
Collection | 中国科学院金属研究所 |
Recommended Citation GB/T 7714 | Shen, Jingjie,Nagasak, Takuya,Muroga, Takeo,et al. Study on anisotropy in microstructure and tensile properties of the 12Cr oxide dispersion strengthened (ODS) steel[J]. FUSION ENGINEERING AND DESIGN,2019,146:1082-1085. |
APA | Shen, Jingjie.,Nagasak, Takuya.,Muroga, Takeo.,Li, Yanfen.,Yang, Huilong.,...&Abe, Hiroaki.(2019).Study on anisotropy in microstructure and tensile properties of the 12Cr oxide dispersion strengthened (ODS) steel.FUSION ENGINEERING AND DESIGN,146,1082-1085. |
MLA | Shen, Jingjie,et al."Study on anisotropy in microstructure and tensile properties of the 12Cr oxide dispersion strengthened (ODS) steel".FUSION ENGINEERING AND DESIGN 146(2019):1082-1085. |
Files in This Item: | There are no files associated with this item. |
Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.
Edit Comment