Prediction of microstructure and mechanical properties of hot rolled strip steel: Part II - Verification and application | |
Lan, YJ; Li, DZ; Sha, XC; Li, YY | |
通讯作者 | Lan, YJ(yjlan@imr.ac.cn) |
2004-07-01 | |
发表期刊 | STEEL RESEARCH INTERNATIONAL
![]() |
ISSN | 0177-4832 |
卷号 | 75期号:7页码:468-474 |
摘要 | This part is the verification and application of the local and through models as described in previous part 1 [7]. In-house software system ROLLAN (Rolling Analysis) is developed in our laboratory to simulate the process history such as temperature evolution, strain and rolling force etc. Metallurgical phenomena include recrystallization in roughing and finishing, phase transformation in laminar cooling and final mechanical properties. Each local model is verified by laboratory and hot strip mill experiments, and a large amount of experimental data from the mill is collected for computational use. The mechanical properties of samples from the strip tail are compared with results predicted by the models. They agree very well for C-Mn steels. In addition, two typical strip coils are opened, cut in the room temperature and divided into multi-sections. The calculated and the measured microstructure and mechanical properties along the length direction are compared. The results show that both yield strength and tensile strength are in good agreement. Though elongation reveals a little deviation, reasonable agreement with the predicted results is achieved. However, it is also found that the properties vary in the length direction of the strip. Analysis indicates that this is caused by the inhomogeneity of the microstructure, while the latter is caused by process parameters. |
关键词 | verification application temperature microstructure and mechanical properties |
收录类别 | SCI |
语种 | 英语 |
WOS研究方向 | Metallurgy & Metallurgical Engineering |
WOS类目 | Metallurgy & Metallurgical Engineering |
WOS记录号 | WOS:000222994700007 |
出版者 | VERLAG STAHLEISEN MBH |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.imr.ac.cn/handle/321006/81905 |
专题 | 中国科学院金属研究所 |
通讯作者 | Lan, YJ |
作者单位 | 1.Chinese Acad Sci, Met Res Inst, Shenyang 110016, Peoples R China 2.Anshan Iron & Steel Grp Corp, Anshan, Peoples R China |
推荐引用方式 GB/T 7714 | Lan, YJ,Li, DZ,Sha, XC,et al. Prediction of microstructure and mechanical properties of hot rolled strip steel: Part II - Verification and application[J]. STEEL RESEARCH INTERNATIONAL,2004,75(7):468-474. |
APA | Lan, YJ,Li, DZ,Sha, XC,&Li, YY.(2004).Prediction of microstructure and mechanical properties of hot rolled strip steel: Part II - Verification and application.STEEL RESEARCH INTERNATIONAL,75(7),468-474. |
MLA | Lan, YJ,et al."Prediction of microstructure and mechanical properties of hot rolled strip steel: Part II - Verification and application".STEEL RESEARCH INTERNATIONAL 75.7(2004):468-474. |
条目包含的文件 | 条目无相关文件。 |
个性服务 |
推荐该条目 |
保存到收藏夹 |
查看访问统计 |
导出为Endnote文件 |
谷歌学术 |
谷歌学术中相似的文章 |
[Lan, YJ]的文章 |
[Li, DZ]的文章 |
[Sha, XC]的文章 |
百度学术 |
百度学术中相似的文章 |
[Lan, YJ]的文章 |
[Li, DZ]的文章 |
[Sha, XC]的文章 |
必应学术 |
必应学术中相似的文章 |
[Lan, YJ]的文章 |
[Li, DZ]的文章 |
[Sha, XC]的文章 |
相关权益政策 |
暂无数据 |
收藏/分享 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论