Effect of friction stir processing on the kinetics of superplastic deformation in an Al-Mg-Zr alloy | |
Ma, ZY; Mishra, RS; Mahoney, MW; Grimes, R | |
通讯作者 | Ma, ZY(rsmishra@umr.edu) |
2005-06-01 | |
发表期刊 | METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE
![]() |
ISSN | 1073-5623 |
卷号 | 36A期号:6页码:1447-1458 |
摘要 | The effect of friction stir processing on the superplastic behavior of extruded Al-4Mg-1Zr was examined at 350 ° C to 600 ° C and at initial strain rates of 1 X 10(-3) to 1 s(-1). A combination of a fine grain size of 1.5 μ m and high-angle grain boundaries in the friction stir-processed (FSP) alloy led to considerably enhanced superplastic ductility, much-reduced flow stress, and a shift to a higher optimum strain rate and lower optimum temperature. The as-extruded alloy exhibited the highest superplastic ductility of 1015 pct at 580 ° C and an initial strain rate of 1 X 10(-2) s(-1), whereas a maximum elongation of 1280 pct was obtained at 525 ° C and an initial strain rate of 1 X 10(-1) s(-1) for the FSP alloy. The FSP alloy exhibited enhanced superplastic deformation kinetics compared to that predicted by the constitutive relationship for superplasticity in fine-grained aluminum alloys. A possible origin for enhanced superplastic deformation kinetics in the FSP condition is proposed. |
收录类别 | SCI |
语种 | 英语 |
WOS研究方向 | Materials Science ; Metallurgy & Metallurgical Engineering |
WOS类目 | Materials Science, Multidisciplinary ; Metallurgy & Metallurgical Engineering |
WOS记录号 | WOS:000229537000007 |
出版者 | MINERALS METALS MATERIALS SOC |
引用统计 | |
文献类型 | 期刊论文 |
条目标识符 | http://ir.imr.ac.cn/handle/321006/83896 |
专题 | 中国科学院金属研究所 |
通讯作者 | Ma, ZY |
作者单位 | 1.Chinese Acad Sci, Met Res Inst, Shenyang 110016, Peoples R China 2.Univ Missouri, Dept Mat Sci & Engn, Columbia, MO 65409 USA 3.Rockwell Sci, Thousand Oaks, CA 91360 USA 4.Univ London Imperial Coll Sci Technol & Med, Dept Mat, London SW7 2BP, England |
推荐引用方式 GB/T 7714 | Ma, ZY,Mishra, RS,Mahoney, MW,et al. Effect of friction stir processing on the kinetics of superplastic deformation in an Al-Mg-Zr alloy[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE,2005,36A(6):1447-1458. |
APA | Ma, ZY,Mishra, RS,Mahoney, MW,&Grimes, R.(2005).Effect of friction stir processing on the kinetics of superplastic deformation in an Al-Mg-Zr alloy.METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE,36A(6),1447-1458. |
MLA | Ma, ZY,et al."Effect of friction stir processing on the kinetics of superplastic deformation in an Al-Mg-Zr alloy".METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE 36A.6(2005):1447-1458. |
条目包含的文件 | 条目无相关文件。 |
除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。
修改评论