IMR OpenIR
Efeects of friction stir welding parameters on microstructures and mechanical properties of ZK60 magnesium alloy joints
Xie Guangming1,2; Ma Zongyi1; Geng Lin2
通讯作者Ma Zongyi(zyma@imr.ac.cn)
2008-06-01
发表期刊ACTA METALLURGICA SINICA
ISSN0412-1961
卷号44期号:6页码:665-670
摘要Six millimeters thick ZK60 alloy plates were successfully friction stir welded (FSW). The sound welded joints were achieved under a wide range of welding parameters (rotation rate of 600-1200 r/min and traverse speed of 50-200 mm/min). After FSW, the coarse grains in ZK60 alloy were changed to fine equiaxed recrystallized grains at the nugget zone. Furthermore, the coarse MgZn2 particles were broken up and mostly dissolved into the matrix. For the ZK60 magnesium alloy, the precipitation strengthening effect was more dominant than fine-grain strengthening effect. Therefore, hardness value of the nugget zone was lower than those of the parent material and the fracture occurred at the nugget zone. At low heat input parameters (<= 800 r/min), the grain sizes in the nugget zone, and the tensile strengths and elongations of welded joints at different parameters were similar, but at high heat input parameter (1200 r/min), the grains in the nugget zone became large and the tensile strength of welded joint slightly decreased. After aging treatment, the strengths and elongations of welded joints under different parameters increased and their mechanical properties were similar.
关键词friction stir welding magnesium alloy microstructure mechanical property
收录类别SCI
语种英语
WOS研究方向Metallurgy & Metallurgical Engineering
WOS类目Metallurgy & Metallurgical Engineering
WOS记录号WOS:000257410200005
出版者SCIENCE CHINA PRESS
引用统计
被引频次:8[WOS]   [WOS记录]     [WOS相关记录]
文献类型期刊论文
条目标识符http://ir.imr.ac.cn/handle/321006/92890
专题中国科学院金属研究所
通讯作者Ma Zongyi
作者单位1.Chinese Acad Sci, Inst Met Res, Shenyang 110016, Peoples R China
2.Harbin Inst Technol, Sch Mat Sci & Engn, Harbin 150001, Peoples R China
推荐引用方式
GB/T 7714
Xie Guangming,Ma Zongyi,Geng Lin. Efeects of friction stir welding parameters on microstructures and mechanical properties of ZK60 magnesium alloy joints[J]. ACTA METALLURGICA SINICA,2008,44(6):665-670.
APA Xie Guangming,Ma Zongyi,&Geng Lin.(2008).Efeects of friction stir welding parameters on microstructures and mechanical properties of ZK60 magnesium alloy joints.ACTA METALLURGICA SINICA,44(6),665-670.
MLA Xie Guangming,et al."Efeects of friction stir welding parameters on microstructures and mechanical properties of ZK60 magnesium alloy joints".ACTA METALLURGICA SINICA 44.6(2008):665-670.
条目包含的文件
条目无相关文件。
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
谷歌学术
谷歌学术中相似的文章
[Xie Guangming]的文章
[Ma Zongyi]的文章
[Geng Lin]的文章
百度学术
百度学术中相似的文章
[Xie Guangming]的文章
[Ma Zongyi]的文章
[Geng Lin]的文章
必应学术
必应学术中相似的文章
[Xie Guangming]的文章
[Ma Zongyi]的文章
[Geng Lin]的文章
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。